The 7 Minute Rule Explained
The 7 minute rule rounds a clock punch to the nearest quarter hour: 1 to 7 minutes past a quarter hour rounds down and 8 to 14 minutes rounds up. The federal regulation does not use that name. It accepts rounding to the nearest 5 minutes, tenth of an hour or quarter hour only when the practice averages out and does not leave workers short over time.
The rounding table
Every quarter hour has a 7 minute zone on each side. A punch inside the zone moves back to the quarter hour it just passed, and a punch past it moves forward to the next one.
| Minutes past the quarter hour | Rounds | Example |
|---|---|---|
| 0 | Stays | 8:00 stays 8:00 |
| 1 to 7 | Down to that quarter hour | 8:07 becomes 8:00 |
| 8 to 14 | Up to the next quarter hour | 8:08 becomes 8:15 |
The same arithmetic works for the other steps the regulation names. The table shows where each one switches from rounding down to rounding up.
| Rounding step | Minutes past the mark that round down | Minutes that round up |
|---|---|---|
| Nearest 5 minutes | 1 to 2 | 3 to 4 |
| Nearest tenth of an hour (6 minutes) | 1 to 2 | 3 to 5 |
| Nearest quarter hour (15 minutes) | 1 to 7 | 8 to 14 |
What 29 CFR 785.48(b) says
Section 785.48(b) of Title 29 of the Code of Federal Regulations covers rounding. It describes the long practice of recording starting and stopping times to the nearest 5 minutes, one-tenth of an hour or quarter of an hour, and presumes that this averages out so employees are paid for all the time they work. For enforcement purposes the practice is accepted, provided it does not result, over a period of time, in failure to pay employees for all the time they have actually worked.
The section names three rounding steps and never mentions a 7 minute rule. The quarter hour version is one way to apply it, and the name is a nickname. The test the section sets is about the result over time, so a rounding method passes or fails on the pay it produces.
Is the 7 minute rule legal?
Federal regulation accepts quarter hour rounding when it does not, over time, leave employees short of pay for the time they worked. Whether one workplace meets that test depends on its pay records over a period of time. This page cannot judge that, and state law was not checked.
One worked week
An employee takes an unpaid 30 minute break on each of five days and punches in and out as shown. The calculator rounds every punch to the nearest quarter hour and then subtracts the break.
| Day | Clock in | Clock out | Exact paid time | Rounded in | Rounded out | Rounded paid time | Change |
|---|---|---|---|---|---|---|---|
| Monday | 07:56 | 16:34 | 8:08 | 8:00 | 16:30 | 8:00 | -8 min |
| Tuesday | 08:08 | 17:03 | 8:25 | 8:15 | 17:00 | 8:15 | -10 min |
| Wednesday | 07:52 | 17:08 | 8:46 | 7:45 | 17:15 | 9:00 | +14 min |
| Thursday | 08:01 | 16:59 | 8:28 | 8:00 | 17:00 | 8:30 | +2 min |
| Friday | 07:58 | 17:22 | 8:54 | 8:00 | 17:15 | 8:45 | -9 min |
| Week | 42:41 | 42:30 | -11 min |
Exact paid time for the week is 42:41 and rounded paid time is 42:30, which is 11 minutes less. Wednesday gained 14 minutes because both punches fell in the zone that rounds in the employee’s favor. Monday, Tuesday and Friday lost time because the punches fell the other way. One week is a small sample. Section 785.48(b) looks at the result over a period of time, so a single week cannot settle it.
Check your own week
Enter your own punch times in the 7 minute rule calculator. Set rounding to none to see the exact time, set it back to 15 minutes to see the rounded time, and compare the two totals. Do this over several weeks. A running difference in one direction is worth raising with your payroll contact.
What this page does not cover
This page covers the federal text only. State wage laws, union contracts and an employer’s written policy can add rules, and they were not checked for this page. This is general information and not legal advice.
Sources
- Title 29 CFR 785.48, Use of time clocks (eCFR, text version of 10 November 2026, read 17 November 2026): https://www.ecfr.gov/current/title-29/section-785.48
- The rounding results and the worked week come from the calculator engine on this site. Related tool: time card calculator with lunch break.
This article is for information only and does not constitute legal or financial advice. If you need specific guidance, consult a licensed professional.
Related posts
- Part-Time Bank Holiday Entitlement UKPart-timers get 5.6 weeks of holiday and bank holidays can be included. See how many days each working pattern uses in 2026, with Acas and GOV.UK sources.
- SMP When the April Rate ChangesStatutory Maternity Pay changes in April. See a week-by-week example, why one day can move the total, and the sources, checked against GOV.UK.
- Pay in Lieu of Notice (PILON) UKPILON is a payment instead of working your notice. It needs a clause in your contract or your agreement. See what it covers and how it is taxed.